Best 12v LED light bar

Are you looking for off-road lighting for your adventure vehicle? What about accent lights for your van conversion? Look no further than LED light bars.

There are so many different light bars on the market, it’s time consuming trying to compare them all. So, we’ve put together the 5 best in class light bars for off-road vehicles and van conversions.

5 Best in Class Light Bars for Off-Road Vehicles and Van Conversions

Nilight Triple Row Light Bar

best 12v led light bar

The Nilight Triple Row Light Bar is a 20-inch long, 420-watt LED light bar with 3 rows of lights. There’s a nest reflector cup design in the middle to make the best use of the lights as possible. Not to mention the extremely bright, multi-angle reflective plate.

This Nilight acts as an off-road light for adventure vehicles, as well as a flood/spot light for those with converted vans. If you want to illuminate an area outside of your recreational vehicle or van, simply slide the screws into the ground.

This 12V light can be installed on the roof and bumper of your ATV, Jeep, truck, SUV, 4×4, and van. The mounting brackets are adjustable so you can use this light bar in many different situations, including on the side of a boat for nighttime fishing.


  • 2 Year Warranty
  • Over 30,000 hours of use
  • IP67 waterproofing
  • Strong aluminum alloy housing


  • Must buy 5/16 nuts and bolts – the included hardware is not correct

Lumitex CREE Light Bar

Main light bar with two side lights

The Lumitex CREE Light Bar is a 20-inch long, 126-watt LED light bar that features both spot and flood lights. The brighter illumination in the middle will light up the road in front of you whether mounted on the front roof or relay, rear roof, or bonnet.

This 12V Lumitex is super portable, so you can put it on your adventure vehicle, conversion van, Jeep, 4WD, ATV, off-road vehicles, and a boat. The CREE Light Bar is waterproof, so you don’t have to worry about sealing it after the fact. Some people still do for peace of mind, but as is it will fight off condensation and kicked-up debris.

Mounting equipment and around 2 feet of wire are included, but there is no wiring harness so you must purchase it separately if you need one.


  • IP67 waterproofing
  • Over 30,000 hours of use
  • 1 Year warranty


  • Included brackets tend to rust quickly
  • Won’t fit a bully bar without modifications

Eyourlife CREE Light Bar

adjustable led light bar

Eyourlife CREE Light Bar is a 12-inch flood/spot combo light bar made for dark off-roads and empty highway night driving. The flood lights are angled at 30 degrees and the spot lights are angled at 60 degrees for the brightest illumination possible.

The light distribution of the 12 volts equals 72 watts, and the slide brackets make the beam tilt adjustable. You can maneuver this Eyourlife product by up to a 45-degree angle to illuminate the right part of the road, off-road, or body of water.

Stainless steel side mounting brackets are included, and you can attach the adaptable light bar to your bumper, bonnet, and forward or rear-facing roof. This product can fit most SUVs, trucks, 4WD, motorcycles, boats, and off-road recreational vehicles.


  • Easy cooling
  • IP67 waterproofing
  • Easy to install
  • 1 Year Warranty
  • Over 50,000 hours of light


  • Lights dim and go out quickly
  • Bad customer service

Nilight LED Lights

nlight leds

The 18-watt Nilight LED Lights come in a set of two pods, and the concentrated light source comes together for a total of 1269 lumens. If you want to adjust these 30-degree mini light bars, you’re in luck. They can angle up to 45 degrees so you can point the illumination where you need it.

In terms of mounting, these LED pods are a universal fit for just about any recreational vehicle, off-road vehicle, or converted van. You can take these compact LED lights out in 3.3 feet of water for 30 minutes before the waterproofing gives out. They are also dustproof since you’ll probably be kicking up dust in your wake.

You can mount these 12V bar pods anywhere on your vehicle besides the bull bar, bonnet, and bumper. Instead, they are more suited to roof/cab mounting on the forward, side, and rear. They are shockproof for off-roading, and can even be used as backyard and indoor lighting.


  • Over 30,000 hours of life
  • IP67 waterproofing
  • Anti-corrosive
  • 2 Year Warranty
  • Easy to install


  • Nuts and bolts rust
  • Condensation seeps inside, so caulk with clear silicone before use


AMBOTHER LED Pods come in pairs, and each measures 4 inches x 4 inches. There are 3 rows of flood lights, so the view is wider and the brightness is higher. These flood lights are positioned at 170 degrees, while the spotlights surrounding them are at a 15-degree angle.

These 12V light bars equal 120 watts, which translates to a whopping 12800 lumens. To mount the AMBOTHER LED pods, use the included hardware to place them on the roof or cab. These will not work on bumpers, bull bars, or bonnets, but the adjustable bracket can get you there.

If you plan on braving the winter weather, these mini light bars will work in temperatures down to -40 degrees Fahrenheit. What’s more, the design was created to tackle water, corrosion, and shock.


  • Over 100,000 hours of use
  • 2 Year Warranty and lifetime support
  • IP67 waterproofing
  • Universal vehicle use


  • The power cable is not centered making ambidextrous mounting impossible

12v led light bar FAQ’s

Are cheap LED light bars any good?
LED light bars can perform well even if bought on a tight budget. LED technology is very simple and you can get powerful lights for a low cost. The cost increase is typically associated with better housing and casing so they’re more durable and able to maintain performance over a longer period of time in harsher conditions.

Are curved light bars better?
Curved light bars can be more aesthetic as they’ll fit nicely to the shape of your vehicle. Looks are in the eye of the beholder mind so this may not be the case for everyone!

What are cree light bars?
Cree are a company based in North Carolina who manufacture LEDs. These are then sold onto companies to use in their products.

Are Cree light bars any good?
Cree LED’s are some of the best in the industry due to their long life and luminance maintenance at over 95% during the LEDs life time.

Leave a Reply

Your email address will not be published. Required fields are marked *